The manufacturing process of the vacuum bottle

vacuum bottles have been used in many companies and enterprises. However, employees may not fully understand the vacuum bottle. In this article, I will introduce the knowledge of vacuum bottles to a certain extent. I hope that after reading this article, the information obtained is helpful to you.

The manufacturing process of the vacuum bottle.

Application scenarios of vacuum bottles.

The vacuum bottle products provided by the company.

The manufacturing process of the vacuum bottle.

The core component of the vacuum bottle is the container. The following 4 steps are required to manufacture the bottle gall.

①Preform preparation. The glass material used for the vacuum bottle is commonly used soda lime silicate glass. Take a uniform and impurity-free high-temperature molten glass and blow it into a glass inner preform and an outer preform with a wall thickness of 1~2mm in a metal mold (see Glass Manufacturing).

②Ball blanks. The inner bottle is placed in the outer bottle, the mouth of the bottle is continuously sealed into a whole, and a pipe for silver plating and air extraction is arranged at the bottom of the outer bottle. This kind of glass structure is called a bottle blank. There are three main types of glass bottle blanks: pull-bottom sealing method, shrink-shoulder sealing method and waist sealing method.

③Silver plating. A certain amount of silver ammonia complex solution and aldehyde solution as a reducing agent are poured into the interlayer of the bottle blank through a small tail catheter to carry out the silver mirror reaction, and the silver ions are reduced and deposited on the glass surface to form a thin layer of mirror silver film.

④ Vacuuming. Connect the tail pipe of the silver-plated double-layer bottle blank with a vacuum system and heat it to 300~400°C to promote the release of various gases and residual moisture absorbed by the glass. At the same time, use a vacuum pump to pump air, and the tail tube will be melted and sealed when the vacuum degree of the interlayer space of the bottle bladder reaches 10-3~10-4mmHg.

Application scenarios of vacuum bottles.

Target groups: shopping malls and supermarkets; large distributors, wholesalers or importers; household goods stores;

Specific scenarios: home, restaurant, hotel, outdoor, office;

Main markets: North American, European market, Asia, South American.

The vacuum bottle products provided by the company.

The company's main products are vacuum flask and thermos with glass liner, double wall stainless steel thermos flask, thermos glass liner replacement. With different size, color and material. Like 0.45liter, 0.6liter, 0.7liter, 1.0liter, 1.2liter, 1.3liter,1.5liter, 1.9liter,2.0liter,2.2liter,2.5liter,3.0liter, 4.0liter,5liter,5.5liter,7.5liter,9.5liter,11liter,13liter thermo flask.. The company's sales channels are mainly exported, and its products are mainly exported to North American & South American, Asia, European, African. It is supplemented by domestic sales, accounting for about 20%, mainly including Thermos, vacuum flask, termos, thermos flask, airpot coffee dispenser, travel thermos,vacuum bottle,vacuum coffee pot, vacuum jug, etc.. If there is a vacuum bottle product that suits your needs, you can buy it. We will provide you with the best vacuum bottle products and services.

If you want to buy vacuum bottles and other products, you can consider our company (Hunan Huihong). Welcome to our company to buy vacuum bottle products, we will provide you with the best vacuum bottle products and services. We look forward to your visit. Finally, I wish you success at work, good health and a happy family.